Bench grinders
Floorstand grinder accessories
Reduction bushes
Description
The enclosed reduction bush set minimises the range of tools required and saves on storage space. Reduction bushes are available free of charge to be used with all bench grinding wheels, see table.
Advantages
Bench grinding wheels, conventional ceramic
For non and low-alloyed steels
Description
Vitrified bonded bench grinding wheels are primarily used in workshops and repair companies. They can be used universally for grinding and sharpening various components. The tailored specifications enable them to be used for a wide range of applications, from coarse to fine grinding.These wheels are supplied in packaging suitable for retailers so that they take up minimum space in storage. A reduction bush set is included in the packaging or can be reordered.
Advantages
- Universal use
- Long lifetime
- Stackable
Bench grinding wheels, conventional ceramic
For high-alloyed steels and HSS
Description
This wheel is preferable for grinding and sharpening temperature-sensitive steels and HSS tools. The use of aluminium oxide results in particularly cool grinding so that the workpiece is not subjected to additional thermal load.We offer a wide spectrum of dimensions to cover the most common applications. A reduction bush set is included in the packaging or can be reordered.
Advantages
- Cool grinding
- Extremely smooth running
- Stackable
Bench grinding wheels, conventional ceramic
For tungsten carbide and cast iron
Description
When sharpening solid carbide or tungsten carbide tipped tools, only wheels with silicon carbide specifications should be used. Due to their special grain shape you can achieve good results even on extremely hard workpieces.This wheel can also be used for cast iron. A reduction bush set is included in the packaging or can be reordered.
Advantages
- Clean cutting
- Optimum grit size
- Stackable
Sharpening wheel for cutting tool
For steel, HSS, stainless steel and tungsten carbide
Description
This product was specially developed for sharpening whittlers. Its grit size and tailored bond system enable you to achieve particularly cool grinding. Its fine surface improves the cutting ability and lifetime of the cutting tools.Ensure that you pay attention to the direction of rotation of the wheel when in use. The sharpening wheel must always move away from the cutting edge. In addition, the wheel flange diameter must be at least two thirds of the wheel diameter.
Advantages
- Cool grinding
- Long lifetime
- Excellent workpiece surface finish
Fine grinding and polishing wheels
For steel, HSS, stainless steel, tungsten carbide and cast iron
Description
The soft elastic specification of this wheel means it perfectly follows the contours of the workpiece and does not alter the surface geometry. It can be used for polishing, fine grinding, effect grinding, deburring, matting and whetting.However, it is not suitable for large burrs or high stock removal rates.
Advantages
- Universal use
- Easy profiling
- For straight and shallow profiles
Bench grinding wheels, conventional ceramic
For nonferrous metals
Description
An inhouse-developed clean-cutting specification for bench grinding wheels enables the grinding of nonferrous metals such as aluminium, aluminium base alloys, bronze, copper, copper alloys and titanium. High-quality silicon carbide provides for effortless surface grinding and deburring of workpieces.Through minimal clogging of the grinding wheel, dressing times are reduced and dressing cycles prolonged.
Advantages
- Universal application
- Minimal clogging
- Easy dressing