Belt grinder
PREMIUM*** ZA-P48 PE Y F / ZA-P41 PC X mini belts
for steel, stainless steel and aluminium
Description
The Premium*** belts have been specially designed for the mini belt grinder and prevent grain break outs on the tool due to their special curvature. A good stock removal rate and long lifetime allow consistent results to be delivered in shorter working hours. Our belts are easy to handle and mount.TYROLIT mini belts can be used on all steel, stainless steel and nonferrous metals.
Advantages
- Zirconia alumina and an additional coolant layer for maximum lifetime and cool grinding
- Very good stock removal
- ZA-P48 polyester braid backing with coolant layer for higher abrasiveness, cooler grinding and edge stability
PREMIUM*** SCM belts
for universal use
Description
With belts from the TYROLIT SCM range, TYROLIT is taking another step towards economic efficiency. The machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit.Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. In addition, the TYROLIT SCM range boasts the best results in terms of lifetime.
Advantages
- Outstanding economy thanks to maximum stock removal combined with short workpiece machining time
- Robust belt design guarantees maximum lifetime
- Comprehensive assortment
BASIC* A-B06 PC X belts
for universal use
Description
The BASIC* belts for the portable belt grinder can be used universally, but are most commonly used on wood. They are suited to this use as they comprise aluminium oxide and polycotton backing. A special grain coating prevents loading of the belts when grinding soft materials, such as wood and paints.This delivers a good grinding power and long lifetime. Simple handling and mounting save extra working time.
Advantages
- Universal use
- Good lifetime
- Good stock removal
PREMIUM*** ZA-P48 PE Y belts
for steel and stainless steel
Description
Due to the hard zirconium used in these PREMIUM*** belts they are ideal for very high pressure and deliver above-average stock removal rates. Active coolants reduce the generation of heat while grinding. This high-performance product equipped with durable polyester backing has been developed for demanding steel and stainless steel applications.These products are mainly used for dry applications.
Advantages
- Outstanding stock removal and ideal for grinding using high pressure through the use of hard zirconium
- Minimal generation of heat while grinding thanks to active coolant layer
- Durable polyester for a robust belt design
PREMIUM*** CA-P93 PE Y belts
for steel and stainless steel
Description
Belts with self-sharpening ceramic grain offer a high stock removal rate on steel and stainless steel. Thanks to this self-sharpening effect, an even surface quality is achieved over the entire lifetime of the abrasive belts.Moreover, the composition of the abrasive belt reduces effort for the operator as less pressure is required.
Advantages
- Highest possible stock removal thanks to the use of ceramic grain
- Self-sharpening grain for constantly good surface result combined with reduced operator workload
- Coolant layer for very cool grinding
PREMIUM*** ZA-P41 PC X belts
for steel and nonferrous metals
Description
This high-performance product equipped with durable polycotton has been developed for demanding steel and nonferrous metal applications. Combined with hard zirconium, these belts are ideal for very high pressure and deliver above-average stock removal rates. Active coolants reduce the generation of heat while grinding.Another special feature: the product can also be used wet with oil, emulsion or water and still delivers optimal results.
Advantages
- Outstanding stock removal and ideal for grinding using high pressure through the use of hard zirconium
- Minimal generation of heat while grinding thanks to active coolant in the bond
- Durable polycotton for a robust belt design
- Grit sizes 24, 36 and 100 available on request
PREMIUM*** ZA-P43 PE Y belts
for steel and nonferrous metals
Description
This PREMIUM*** product equipped with polyester has been developed for steel and nonferrous metal applications. Combined with hard zirconium, these belts are ideal for low to medium pressure and deliver a good stock removal rate.Active coolants reduce the generation of heat while grinding.
Advantages
- Outstanding stock removal and ideal for grinding using light and medium pressure
- Minimal generation of heat while grinding thanks to active coolant in the bond
- Stiff polyester for maximum stock removal
PREMIUM*** SCM belts
for universal use
Description
With the belts from the TYROLIT SCM range, TYROLIT is taking another step towards economic efficiency. The machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the main argument.Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of welding seams can be realised. In addition, the TYROLIT SCM range boasts the best results in terms of lifetime.
Advantages
- Outstanding economy thanks to maximum stock removal combined with short workpiece machining time
- Robust belt design guarantees maximum lifetime
- Comprehensive assortment