Stationary cutting machines

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.The assortment of these cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability.

In order to cut nonferrous metals, the tool must have a high cutting ability. To this end, TYROLIT has developed a special formula and production method in order to achieve short cutting times with NF metals too.New specifications prevent the clogging and dulling of the grinding wheel which used to be a common result of material abrasion.

Този инструмент предлага не само икономично решение за ежедневната ви дейност, но и обичайния за TYROLIT висок стандарт на безопасност. Това се дължи на много добрата дълготрайност и стабилност на отрезния диск STANDARD**. Инструментът е подходящ преди всичко за рязане на монолитен материал. Асортиментът от отрезни дискове STANDARD** за стомана се простира в диапазона от 2,5 до 3,0 мм. Те предлагат дълъг живот и универсално приложение.

The quality of the PREMIUM*** cut-off wheel ensures the longest lifetime and cost-effective operation. By using the grit size 100, a particularly low burr result is achieved. The cut-off wheel in small diameters is designed for use on straight grinders.This tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material.

The BASIC* cut-off wheel for steel is suitable for cutting profiles, solid material and large cross-sections due to its design with two external reinforcements. With the BASIC* wheel, you can achieve reduced cutting times coupled with minimal effort.Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications.

With this tool you obtain the ideal solution for stationary cutting of common building materials. This PREMIUM*** cut-off wheel achieves the best results for large cross-sections due to its excellent cutting ability that reduces the work of the operator.As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime.

The PREMIUM*** laboratory cut-off wheel is a high-performance cut-off wheel for ferrous metals such as steel and stainless steel. It is used for cutting laboratory samples that have to be cut quickly and without structural alterations, workpiece deformations or cracks. Assembly is usually carried out on wet cutting systems with a manual or automatic feed, at a maximum operating speed of 50 m/s.The workpiece must be fixed during machining and the wheel must not be exposed to lateral load. Laboratory cut-off wheels are available in various specifications: soft for 60.5-72.3 HRC, medium for 22.0-60.5 HRC, hard for less than 22.0 HRC

This PREMIUM*** wheel is a non-reinforced high-performance cut-off wheel for stationary machines and automatic saw sharpening machines. As these cut-off wheels are manufactured without reinforcement, they are only suitable for wet cutting on stationary machines.The workpiece must be fixed during machining and the wheel must not be exposed to lateral load.

The high-performance cut-off wheel for HSS achieves a perfect cutting performance thanks to its innovative bond system and tailored grain quality. Avoid feed values that are too high during machining, to prevent a cut deviation.Assembly is usually carried out on wet cutting systems with a manual or automatic feed, at a maximum operating speed of 50 m/s.

The high-performance cut-off wheel for tungsten carbide achieves a perfect cutting performance thanks to its innovative bond system and tailored grain quality. Avoid feed values that are too high during machining, to prevent a cut deviation.Assembly is usually carried out on wet cutting systems with a manual or automatic feed, at a maximum operating speed of 50 m/s.